ECO2 LEVEL™

ECO2 LEVEL™ is a solvent-free high performance calcium-aluminate cement based self leveler that is fast curing, self drying, self finishing, and highly polymer-modified. It can be poured or pumped to correct, level, and smooth substrates from a feathered edge up to 1 1/2″ neat or up to 5″ with aggregate.

Green Features

• 75% recycled content (37.5 lb per 50 lb bag)
• 100% silica sand free
• pH 11 in wet-state (eco-friendly for installers)
• Solvent-free – no VOCs
• Improves indoor air quality compared to Portland cement-based products
• Will not promote mold, mildew or bacteria growth
• Use with ECO2 MMS/MMS RAPID™ + ECO2 AGGREGATE™ as a complete “green” system to protect finish flooring from moisture up to 100% RH as per ASTM F-2170
• Meets California Department of Public Health CDPH/EHLB/Standard Method Version 1.2, 2017 (Emission testing method for CA Specification 01350)
• Contributes to LEED® and WELL® objectives and requirements
• LEED v4 Health Product Declaration v2.1
• LEED v4 Certificate of Recycled Content

Packaging
50 lb (22.7 kg) bag

  Technical Data Sheet
  Environmental Data Sheet
  Safety Data Sheet
  Third Party Certificate of Recycled Content (LEED® v4)
  Approved HPDC Preparer Health Product Declaration (LEED® v4)
  Third Party Certified Letter LEED4 and Declared Red List
  VIDEO: ECO2 LEVEL

ECO2 LEVEL™ LITE

ECO2 LEVEL™ LITE is a solvent-free high performance lightweight calcium-aluminate cement based self leveler that is fast curing, self drying, self finishing, and highly polymer-modified. It can be poured or pumped to correct, level, and smooth substrates from a feathered edge up to 1 1/2″ neat. ECO2 LEVEL LITE is 25% lighter than the original ECO2 LEVEL Formula.

Green Features

• 60% recycled content (21 lb per 35 lb bag)
• 100% silica sand free
• pH 11 in wet-state (eco-friendly for installers)
• Solvent-free – no VOCs
• Improves indoor air quality compared to Portland cement-based products
• Will not promote mold, mildew or bacteria growth
• Use with ECO2 MMS/MMS RAPID™ + ECO2 AGGREGATE™ as a complete “green” system to protect finish flooring from moisture up to 100% RH as per ASTM F-2170
• Contributes to LEED® and WELL® objectives and requirements
• LEED v4 Certificate of Recycled Content

Packaging
35 lb (15.8 kg) bag

  Technical Data Sheet
  Environmental Data Sheet
  Safety Data Sheet
Third Party Certificate of Recycled Content (LEED® v4)

ECO2 LEVEL™ LP

ECO2 LEVEL™ LP (Low Prep) is a solvent-free high-performance polymer-modified self-leveling cement. Its unique hybrid-cement technology allows the ability to successfully install over questionable substrates without the need for additional mechanical preparation such as shot-blasting, scarifying, or grinding. It can be poured or pumped to correct, level, and smooth substrates from a feathered edge up to 3″ neat or up to 6″ with aggregate.

Green Features

• 75% recycled content (37.5 lb per 50 lb bag)
• 100% silica sand free
• pH 10 in wet-state (eco-friendly for installers)
• Solvent-free – no VOCs
• Will not promote mold, mildew or bacteria growth
• Use with ECO2 MMS/MMS RAPID™ + ECO2 AGGREGATE™ as a complete “green” system to protect finish flooring from moisture up to 100% RH as per ASTM F-2170
• Contributes to LEED® and WELL® objectives and requirements
• LEED v4 Health Product Declaration v2.1
• LEED v4 Certificate of Recycled Content

Packaging
50 lb (22.7 kg) bag

  Technical Data Sheet
  Environmental Data Sheet
  Safety Data Sheet
  Third Party Certificate of Recycled Content (LEED® v4)
  Approved HPDC Preparer Health Product Declaration (LEED® v4)
  Third Party Certified Letter LEED4 and Declared Red List

ECO2 LEVEL™ LP LITE

ECO2 LEVEL™ LP LITE (Low Prep) is a solvent-free high-performance lightweight polymer-modified self-leveling cement. Its unique hybrid-cement technology allows the ability to successfully install over questionable substrates without the need for additional mechanical preparation such as shot-blasting, scarifying, or grinding. It can be poured or pumped to correct, level, and smooth substrates from a feathered edge up to 3″ neat. ECO2 LEVEL LP LITE is 30% lighter than the original ECO2 LEVEL LP formula.

Green Features

• 60% recycled content (19.2 lb per 32 lb bag)
• 100% silica sand free
• pH 10 in wet-state (eco-friendly for installers)
• Solvent-free – no VOCs
• Will not promote mold, mildew or bacteria growth
• Use with ECO2 MMS/MMS RAPID™ + ECO2 AGGREGATE™ as a complete “green” system to protect finish flooring from moisture up to 100% RH as per ASTM F-2170
• Contributes to LEED® and WELL® objectives and requirements
• LEED v4 Certificate of Recycled Content

Packaging
32 lb (14.6 kg) bag

  Technical Data Sheet
  Environmental Data Sheet
  Safety Data Sheet
Third Party Certificate of Recycled Content (LEED® v4)

ECO2 FINAL FINISH™

ECO2 FINAL FINISH™ is a fast-setting/fast-curing, ultra-smooth and fine, polymer-modified calcium aluminate cement-based skimcoating and patching compound. The product is used to skim-coat surfaces and fill cracks, depressions, voids and holes in substrates up to 1/2″ (12 mm) deep and can also be used as an embossing leveler.

Green Features

• 14% recycled content (1.4 lb per 10 lb box)
• 100% silica sand free
• pH 11 in wet-state (eco-friendly for installers)
• Solvent-free – no VOCs
• Improves indoor air quality compared to Portland cement-based products
• Will not promote mold, mildew or bacteria growth
• Meets California Department of Public Health CDPH/EHLB/Standard Method Version 1.2, 2017 (Emission testing method for CA Specification 01350)
• Contributes to LEED® and WELL® objectives and requirements

Packaging
10 lb (4.54 kg) bag

  Technical Data Sheet
  Environmental Data Sheet
  Safety Data Sheet
  Approved HPDC Preparer Health Product Declaration (LEED® v4)
  Third party Certificat of recycled content (LEED V4): COMING SOON
  Third party certified letter LEED4 and declared red list: COMING SOON

ECO2 CLIP MORTAR™

ECO2 CLIP MORTAR™ is an industry-first mortar engineered specially for Clip Leveling Spacers. The product is highly polymer-modified and ultra-creamy, designed to wet into both the substrate and tile. ECO2 CLIP MORTAR is silica sand-free, single-component, sag/slump-resistant and ideal for vertical and horizontal installation of normal and large-format non-vitreous, semi-vitreous and impervious tiles, including porcelain and most natural stone with or without Clip Leveling Spacers. The ECO2 CLIP MORTAR formula contains a blend of high-performance ingredients and light-weight recycled glass aggregates that work to create the mortar’s sag and slump resistance; as well as create an incredibly easy, creamy-smooth handling mortar that dramatically increases job site efficiency. A 45 lb (20.4 kg) of ECO2 CLIP MORTAR bag offers the SAME VOLUME/COVERAGE as a 50 lb (22.7 kg) bag of conventional mortar, allowing for easier carrying and transport.

Green Features

• 51% recycled content
• 23 lbs (10.5 kg) of glass per bag diverted from the landfill
• 100% silica sand-free
• Solvent-free – no VOCs
• Will not promote mold, mildew or bacteria growth
• Contributes to LEED® and WELL® objectives and requirements

Packaging
45 lb (20.4 kg) bag, gray or white

  Technical Data Sheet
  Environmental Data Sheet: COMING SOON
  Safety Data Sheet
  Approved HPDC Preparer Health Product Declaration (LEED® v4)
  Third party Certificat of recycled content (LEED V4): COMING SOON
  Third party certified letter LEED4 and declared red list: COMING SOON

ECO2 DEEP PATCH™

ECO2 DEEP PATCH™ is a silica sand-free, lightweight, fast-setting/fast-curing, ultra-creamy, calcium aluminate cement-based, high-performance patching and leveling compound. When mixed exclusively with ECO2 DEEP PATCH ADDITIVE™, the product is used to patch, level and fill cracks, depressions, voids and holes in substrates up to 1″ (25 mm) deep. ECO2 DEEP PATCH is also 30% lighter than traditional patching compounds.

Green Features

• 51% recycled content (11.2 lb per 22 lb bag)
• 100% silica sand free
• pH 11 in wet-state (eco-friendly for installers)
• Solvent-free – no VOCs
• Improves indoor air quality compared to Portland cement-based products
• Will not promote mold, mildew or bacteria growth
• Contributes to LEED® and WELL® objectives and requirements

Packaging
22 lb (10 kg) bag (same coverage as a 40 lb [18 kg] bag of traditional patching compound due to lightweight content)

  Technical Data Sheet

ECO2 DEEP PATCH ADDITIVE™

ECO2 DEEP PATCH ADDITIVE™ is a high-performance acrylic latex additive used exclusively with ECO2 DEEP PATCH™ to create a high-performance patching system. The product can also be used as a primer over plywood and porous concrete surfaces.

Green Features

• Solvent-free acrylic latex
• Low odor, low VOC
• Contributes to LEED® and WELL® objectives and requirements

Packaging
5 US gal (18.9 L) pail

  Technical Data Sheet

ECO2 MMS™

ECO2 MMS™ (MOISTURE MANAGEMENT SYSTEM) is a two-component, solvent-free, 100% solids epoxy-based moisture management one-coat system sealer designed to: (1) Protect finish flooring systems up to 100% RH as per ASTM F-2170; (2) Reduce moisture vapor emission rate of a concrete substrate up to 25 lbs/1,000 sq. ft. per 24 hours down to less than 3 lbs/1,000 sq. ft. per 24 hours per ASTM F-1869; and (3) Resist pH levels up to 14 as per ASTM F-710.

Green Features

• Use ECO2 MMS™ + ECO2 AGGREGATE™ with ECO2 levelers as a complete “green” system to protect finish flooring from moisture up to 100% RH as per ASTM F-2170
• Meets California Department of Public Health CDPH/EHLB/Standard Method Version 1.2, 2017 (Emission testing method for CA Specification 01350)
• Solvent-free – no VOCs

Packaging
2 US gal (7.56 L)
Part A: 1 US gal (3.78 L)
Part B: 1 US gal (3.78 L)

  Technical Data Sheet
  Safety Data Sheet (PART A)
  Safety Data Sheet (PART B)
  Approved HPDC Preparer Health Product Declaration (LEED® v4)
  VIDEO: ECO2 MMS

ECO2 MMS™ RAPID

ECO2 MMS™ RAPID is an innovative moisture management system designed to rapidly seal concrete substrates ensuring optimal conditions for the installation and longevity of finish flooring systems. Its rapid-setting properties and environmental benefits make it a preferred choice for construction projects focused on efficiency and sustainability. ECO2 MMS™ RAPID protects finish flooring systems by blocking moisture, allowing application on concrete with up to 100% relative humidity (RH), meeting ASTM F-2170 standards; reduces moisture vapor emission rates from concrete substrates, allowing up to 25 lbs per 1,000 sq. ft., meeting ASTM F-1869 standards; and maintains concrete pH levels up to 14, as required by ASTM F-710, ensuring compatibility with various flooring materials. ECO2 MMS™ RAPID can also serve as a bonding agent for self-leveling toppings and underlayments, supporting applications up to 2 inches thick when used with sand broadcast*.

Green Features

• Use ECO2 MMS™ RAPID + ECO2 AGGREGATE™ with ECO2 levelers as a complete “green” system to protect finish flooring from moisture up to 100% RH as per ASTM F-2170
• No VOC
• Meets California Department of Public Health CDPH/EHLB/Standard Method Version 1.2, 2017 (Emission testing method for CA Specification 01350)
• Contains materials derived from bio-based renewable sources (up to 30%) an effective contribution to LEED® objectives and requirements

Packaging
1.5 US gal size Kit
Part A: 1 US gal
Part B: 0.5 US gal

  Technical Data Sheet
  Safety Data Sheet (PART A): COMING SOON
  Safety Data Sheet (PART B): COMING SOON
  Approved HPDC Preparer Health Product Declaration (LEED® v4)

ECO2 PRIMER™

ECO2 PRIMER™ is a universal, premium-quality, highly-concentrated, solvent-free acrylic primer used for priming nearly any surface for ECO2™ products without the need for scarifying or shotblasting.

Green Features

• LEED v4 Health Product Declaration v2.1
• Meets California Department of Public Health CDPH/EHLB/Standard Method Version 1.2, 2017 (Emission testing method for CA Specification 01350)
  
• Contribute to LEED® and WELL® objectives and requirements

Other Features

• Use to create tenacious bonds to nearly any substrate
• Use in place of shot-blasting and scarifying, saving valuable time and money
• Use to prime substrate for increased adhesion with self-leveling underlayments, toppings and setting materials

Packaging
5 US gal (18.9 L) pail

  Technical Data Sheet
  Environmental Data Sheet
  Safety Data Sheet
  Approved HPDC Preparer Health Product Declaration (LEED® v4)
  Third Party Certified Letter LEED4 and Declared Red List
  VIDEO: ECO2 PRIMER

ECO2 AGGREGATE™

ECO2 AGGREGATE™ is designed to be used as a broadcast medium into ECO2 MMS™ and ECO2 RAPID MMS™ Epoxy Moisture Management Systems.

Green Features

• 100% recycled content (50 lb per 50 lb bag)
• 100% silica sand free
• 3rd party verified clean for cross contaminates
• Iron-free
• Solvent-free – no VOCs
• Will not promote mold, mildew or bacteria growth
• Use ECO AGGREGATE with ECO2 MMS™ or ECO2 RAPID MMS™, then with ECO2 levelers as a complete “green” system to protect finish flooring from moisture up to 100% RH as per ASTM F-2170
• Meets California Department of Public Health CDPH/EHLB/Standard Method Version 1.2, 2017 (Emission testing method for CA Specification 01350)
• Contributes to LEED® and WELL® objectives and requirements
• LEED v4 Health Product Declaration v2.1
• LEED v4 Certificate of Recycled Content

Other Features

• Provides a profiled substrate when used with ECO2 MMS™ or ECO2 RAPID MMS™ eliminating the need for non-porous priming when self-leveling

Packaging
50 lb bag
63 bags per pallet (pallet weight 3,185 lbs)

  Technical Data Sheet
  Safety Data Sheet
  Approved HPDC Preparer Health Product Declaration (LEED® v4)
  Third Party Certificate of Recycled Content (LEED V4)
  Third Party Certified Letter LEED4 and Declared Red List: COMING SOON